Steel connecting rods VOLKSWAGEN GOLF POLO 1.600 8 - 16v with inverted H

• The fragility of these connecting rods in the event of an increase in horses, especially undersized and with a lubrication hole which leads to a thinning of the section of the stem, is now known./ Li>
• It is easy to see the difference of our application compared to the original version of the 1400 turbo-volumetric engine with direct injection.
• In the package you will find the right tightening torque of the bolts, we also remain at your disposal to answer all your assembly doubts that will allow you to make a correct installation and free of errors due to lack of experience.
• In case you need connecting rods with different sizes than the standard, on request we can "adapt" our processes according to your requests. For this reason, there may be price increases due to these extra changes if required, to our original technical drawing.
• Our technical drawing can also be shown and modified only after the order confirmation, to receive any written confirmations on the changes to be made (eg oversized plug ..)
• This type of application has already been tested by some of our customers and can support over 500hp
• In case of turbo application contactateci because we also have more robust forged pistons

Below the technical data:

• Weight: gr. 486 or 504 CAD / UNA original
• Connecting rod lengthTO: 100.00mm
• Connecting rod head hole diameterB: 100.00mm
• Pin hole diameterC: .00mmQI
• Closing torque 4.2 kgm
• Set consisting of 4 pieces