Oil delivery pipe FIAT PUNTO GT - UNO TURBO 1600 turbo on bearings positioned on the gearbox with restrictor

Turbocharger delivery oil pipe that allows you to install any Garrett turbocharger on double bearings from GT25- GT28 -GTX 28 - GT30 - GTX30 any generation and ProtoXide Gto23 turbochargers and all turbochargers on Garrett bearings.

Steel fitting very useful to apply when you decide to turbo transform any engine and with this special fitting it is possible to both fix it and weld it on the oil sump, to make the connection to bring the turbocharger oil drain back into the sump./ p>

Stainless steel fitting for all the turbochargers Garrett GT series ball bearings, GT25, GT28, GT30, GT35. Complete with gasket.

drilled screw 12 x 1.25 with no internal filter

Hollow screw drilled for oil inlet delivery turbocharger Garrett GBC 14-200 17-250 20-300 22-350 without any internal filter.

Fittings cap to lift water cooler turbocharger. Step 14X1.5

This oil pipe allows you to install either across the board or Garrett Turbochargers original IHI 1446

Oil hose allows you to install the new line to create the oil delivery for the turbocharger on ALL Minicooper R50 engines transformed into turbo, suitable for connection to any position the turbo is connected (high, central, low position).

Steel braided oil hose with Teflon interior which is longer than the original oil hose and allows it to be a quality replacement to be installed on both the entire original IHI Turbocharger line, Mitsubishi TD04, Garrett 1446 which have installed our sandwich for assembling the external oil cooler.

stainless steel fitting for all turbochargers Garrett GT series of bearings, GT25, GT28, GT30, GT35 and Mitsubishi TD015-TD02- TD03- TD04- TD06 and TD05-KKK K03-K04. Complete with its seal.

Fittings and pipes gasket kit Grande Punto - 500 Abarth with Mitsubishi TD04 or Garrett GT2056 turbo, this kit provides the dedicated fittings, gaskets and piping needed to fit the Garrett GT2056 or Mitsubishi TD04 turbochargers.

Hollow screw for pipe with banjo eye for oil outlet on original Fiat Uno Turbo and Fiat Punto gt engine block with 10mm eye and delivery pipe for turbocharger.

Shaped tube difficult for absolute traceability cooling water hose for turbocharger

This tube pressure oil to be used in place of high quality as the original

Aluminum threaded fitting used on all turbochargers Garrett GT series ball bearings, GT25, GT28, GT30, GT35, and many other models.

Oil restrictor fitting made as indicated by Garrett for all Garrett GT - GTX series turbochargers on bearings, Gt25, Gt28, Gt30, Gt35, GTO, GTX 1 and 2 generation