Oil delivery pipe Fiat Coupe 2000 20v Turbo on bearings oil delivery with restrictor

This kit provides the dedicated fittings, gaskets and tubing necessary to mount the Garrett GT1446 turbocharger.

This tube pressure oil to be used in place of high quality as the original

Garrett GT40 - GTX 40 -T3 - T4 - T5 turbocharger oil drain fitting in ergal aluminium.

Restrictor oil fitting required for all Garrett GT and GTX series turbochargers on bearings, gt25, gt28, gt30, gt35, GTO, GTX.

Alfa Romeo 75 1800 turbo fittings and gaskets kit with turbo on bearings, this kit provides the dedicated fittings, gaskets and piping needed for fitting Garrett turbochargers on bearings GT28 - GT30- GT 35 GTX and ProtoXide

Oil drain fitting 10AN connection in aluminum with relative specific gasket usable on all Garrett GT and GTX series turbochargers on bearings such as gt25, gt28, gt30, gt35 and GTX 28 GTX 30 and GTX 35, Mitsubishi TD04 and many other turbocharger models.

Pair of fittings that are difficult to find for water cooling with Lughi hose connector for turbocharger

Oil pipe that allows you to install any Garrett turbocharger on double bearings from the ProtoXide Gto 23 wings Garrett G25-G28-GT30-Gt35 and GTX28-GTX30-GTX35 turbochargers and ProtoXide Gto turbocharger with lateral position above the gearbox side.

Fittings and pipes gasket kit Grande Punto - 500 Abarth with Mitsubishi TD04 or Garrett GT2056 turbo, this kit provides the dedicated fittings, gaskets and piping needed to fit the Garrett GT2056 or Mitsubishi TD04 turbochargers.

Turbo lubrication delivery hose that allows you to install any Garrett turbocharger on double bearings of the GT25- GT28 Gt30 and GTX28 GTX30 Gt 23 line on Prisma Tempra type monoblocks that are commonly used to transform the Fiat Punto Gt or Fiat Uno turbo to 1600. Long oil pipe to reach in front of the monobloc complete with hollow screw and specific restrictor union with American pitch, very difficult to find.

Fittings cap to lift water cooler turbocharger. Step 14X1.5

Steel fitting very useful to apply when you decide to turbo transform any engine and with this special fitting it is possible to both fix it and weld it on the oil sump, to make the connection to bring the turbocharger oil drain back into the sump./ p>

1/8 hollow screw without any internal filter for banjo with 10mm eye tube.

This kit provides the dedicated fittings, the manifold side gasket and the piping necessary for the assembly of the Garrett GT1548 turbochargers.

Pair of fittings that are difficult to find for water cooling with Lughi hose connector for turbocharger

Oil delivery pipe for Lancia Delta, Fiat Coupè, with any engine from 1600 to 2000 both 8 and 16v and allows the installation of any type of Mitsubishi TD05 turbocharger derived from Mitsubishi Evo 8-9 with turbo position on the manifold similar to the original one .