- Online only

Tel +390585026777
Exhaust Manifold for Hyundai transformation in Turbo model with oval ducts, mount external wastegate Stainless steel complete with nuts and studs auburn high temperature. Attack flange T2 or T3.
SECURE ENCRYPTED PAYMENTS
TRACKING NUMBER FOR ALL ORDERS
MON-FRIDAY SUPPORT 10.00-12.30 15.00-17.30
Name | Value |
---|
Fuel pressure regulator, adjustable and directly insertable into the original flute without any modification that allows you to adjust the fuel pressure from 0.5 to 4.8 bar static plus supercharging. It is installed simply by removing the quick clip and putting this regulator nothing else to install.
Original Garrett Turbocharger GT1446 on bushes with shim 360 reinforced
Single-mass flywheel kit in steel with ferodo clutch (not in copper) and ProtoXide Fiat 500 Abarth reinforced pressure plate and all Fiat Grande Punto, Alfa Romeo Giulietta Alfaromeo Mito engines with Fiat 1400 16v turbo T-Jet engine. Lightweight CNC machined steel flywheel that can be installed on both 5-6 speed manual and MTA automatic gearboxes.
Exhaust Manifold in stainless steel with flange mount T2 transformation from naturally aspirated engine Turbo.
Bandage for the isolation of the heat of the exhaust manifold, downpipe and exhaust with a length of 4.5 meters and a width of 5 cm!
Fiat Punto GT oversized red Protoxide spark plug cables specific to very high conductivity with the highest thickness ever 8.8mm for the best conductivity of the high voltage current to the spark plugs.
Turbocharger on double ball "Plug and Play for Lancia Delta 8-16v.
Stainless steel exhaust downpipe for Lancia Delta Integrale 2000 8-16V for Garrett GT30 turbocharger with cast iron scroll with 4 holes.
Steel fitting very useful to apply when you decide to turbo transform any engine and with this special fitting it is possible to both fix it and weld it on the oil sump, to make the connection to bring the turbocharger oil drain back into the sump./ p>
Turbo pressure gauge with needle scale up to 2 bar and fantastic central ProtoXide logo.
Intercooler kit complete front end for the Fiat 500 Abarth.
Fiat Uno Turbo Punto GT oversized red Protoxide spark plug cables specific to very high conductivity with the highest thickness ever 8.8mm for the best conductivity of the high voltage current to the spark plugs. They are longer spark plug cables than the original cables as the coil is installed on the passenger side wheel arch behind the headlight.
Pulleys for varying the camshaft timing up to 10 degrees made of light alloy Fiat 131 Abarth 2000 model without belt guard.
ProtoXide Pop off valve for external venting of Alfa, Fiat, Lancia engines with 1400 T-Jet or Abarth engines with large mechanical puff with double spring to avoid engine warning light failure guaranteed!
SPECIFIC HEAT PROTECTION MADE BEHIND OUR EXPRESS REQUIRED by our American friend / supplier.
This protection prevents the dissipation of the heat produced by this turbocharger which, not being cooled by the engine water, causes the engine compartment to overheat with all the advantages of the case.
With newly built 12 volt relays you can simply use a very fast impulse with a negative or positive command to activate and keep a load of up to 20amp activated and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.
It is found in multiple uses from control units for competition on cars or on industrial vehicles such as excavators 01170716 and agricultural vehicles and nautical applications.
Exhaust Manifold for Hyundai transformation in Turbo model with oval ducts, mount external wastegate Stainless steel complete with nuts and studs auburn high temperature. Attack flange T2 or T3.