Waterproof switch

With this relay you can activate and keep activated a load up to 30amp and then turn it off by removing the impulse to drive any accessory up to 30 amps

Military type switch with safety protection, chrome color.
Suitable for any use, notable aesthetic impact.

Battery cut-off switch with deactivatable key

Pull switch, very convenient to turn anything on or off.

4-position rotary switch with arrow illumination indicating the chosen contact. For multi-contacts or mapping change

With this module improperly called digital relay, you can simply activate, keep activated or pulse a load up to 100 amps with a pulse from 3 to 28 volts.

Inertial safety switch that disconnects the contact in the event of a collision. 2 connection wires.

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

With this you can simply relay via a pulse with control switch and hold a load up 100amp activated and then always turn it off with the usual impulse.

Activate mapping 1 or mapping 2 directly with a simple push of a button on the remote control. An easy way to avoid having to install visible buttons only for all Unichip ECUs, any model and many other ECUs.

Button with extensible spiral wire for normally open activation which can be fixed on the steering wheel for activations of any kind

24v relay which, through a very fast impulse with negative or positive command, can activate and keep activated a load of up to 20 amps and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.

Enable or disable up to 4 relays from a 12 volt supply with the simple press of one of the 4 buttons on your remote. Normally used to open or close exhaust throttles, change maps, or toggle something on/off, screw terminals

Three-position switch.

Pull switch, very convenient to activate something.