Ignition switch supplied with double key

24v relay which, through a very fast impulse with negative or positive command, can activate and keep activated a load of up to 20 amps and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.

With this relay you can manage stable controls and avoid return currents from magnets or electric motors so as not to spoil the control driver itself or the control unit.

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

Tubo in silicone blu intenso, utilissimo per collegare Pop Off, Wastegate e attuatori in genere o passaggi di liquidi come acqua, non adatto per olio.

12 volt timed relay can activate or deactivate any electronic component with a timer that can be set from 0.5 seconds up to 60 hours!

Circuit built and programmed according to your needs up to 2 relays.

Blue illuminated engine start button with dedicated relay box

Spare control unit with double remote control already programmed for use on exhaust valves.

With this relay you can simply by using a very fast pulse with negative or positive command, activate and hold a load up to 20amp and then always turn it off with the usual pulse of a few milliseconds, and so on. 814

Adjustable timer from 1 second up to 16 minutes which allows you to activate or deactivate, for example, a fan, a solenoid or to switch off the engine after a pre-set time by pressing a button.

Three-position switch.

Military type switch with safety protection, yellow colour.
Suitable for any use, notable aesthetic impact.

Battery cut-off switch with deactivatable key

Pull switch, very convenient to turn anything on or off.

Inertial safety switch that disconnects the contact in the event of a collision. 2 connection wires.