Customized 5-12 volt circuit with max 2 relays

24v relay which, through a very fast impulse with negative or positive command, can activate and keep activated a load of up to 20 amps and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.

Switch with red LED integrated.

With this relay you can invert the 12 volt commands so as to obtain opposite results to the command such as on the exhaust valves

Ignition switch with double key

Normally open red button with fixing ring and two screwed poles.

Activate mapping 1 or mapping 2 directly with a simple push of a button on the remote control. An easy way to avoid having to install visible buttons only for all Unichip ECUs, any model and many other ECUs.

Three-position switch.

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

With this you can simply relay via a pulse with control switch and hold a load up 100amp activated and then always turn it off with the usual impulse.

With this relay you can manage stable controls and avoid return currents from magnets or electric motors so as not to spoil the control driver itself or the control unit.

Enable or disable up to 4 relays from a 12 volt supply with the simple press of one of the 4 buttons on your remote. Normally used to open or close exhaust throttles, change maps, or toggle something on/off, screw terminals

Military type switch with safety protection, red colour.
Suitable for any use, notable aesthetic impact.

Waterproof protection suitable for scooters, motorcycles, boats.

Adjustable timer from 1 second up to 16 minutes which allows you to activate or deactivate, for example, a fan, a solenoid or to switch off the engine after a pre-set time by pressing a button.

With this product, you can activate at a distance (up to 30 m) anything.