Relay diodes for currents protect against flyback currents

With this you can simply relay via a pulse with control switch and hold a load up 100amp activated and then always turn it off with the usual impulse.

Waterproof protection suitable for scooters, motorcycles, boats.

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

With this relay you can activate and keep activated a load up to 30amp and then turn it off by removing the impulse to drive any accessory up to 30 amps

4-position rotary switch with arrow illumination indicating the chosen contact. For multi-contacts or mapping change

Three-position switch.

Turn anything on or off with the push of a button from your remote.

With this relay you can invert the 12 volt commands so as to obtain opposite results to the command such as on the exhaust valves

Ignition switch with double key

Button with extensible spiral wire for normally open activation which can be fixed on the steering wheel for activations of any kind

Switch with red LED integrated.

Inertial safety switch that disconnects the contact in the event of a collision. 2 connection wires.

Adjustable timer from 1 second up to 16 minutes which allows you to activate or deactivate, for example, a fan, a solenoid or to switch off the engine after a pre-set time by pressing a button.

Tubo in silicone blu intenso, utilissimo per collegare Pop Off, Wastegate e attuatori in genere o passaggi di liquidi come acqua, non adatto per olio.