Button with extensible spiral wire to activate normally open contacts

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

Inertial safety switch that disconnects the contact in the event of a collision. 2 connection wires.

With newly built 12 volt relays you can simply use a very fast impulse with a negative or positive command to activate and keep a load of up to 20amp activated and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.

It is found in multiple uses from control units for competition on cars or on industrial vehicles such as excavators 01170716 and agricultural vehicles and nautical applications.

With this relay you can invert the 12 volt commands so as to obtain opposite results to the command such as on the exhaust valves

With this relay you can manage stable controls and avoid return currents from magnets or electric motors so as not to spoil the control driver itself or the control unit.

Switch with red LED integrated.

Enables or disables anything with the touch of a button on your remote control.

12 volt timed relay can activate or deactivate any electronic component with a timer that can be set from 0.5 seconds up to 60 hours!

Military type switch with safety protection, transparent red colour.
Suitable for any use, notable aesthetic impact.

Pull switch, very convenient to activate something.

With this module improperly called digital relay, you can simply activate, keep activated or pulse a load up to 100 amps with a pulse from 3 to 28 volts.

Tubo in silicone blu intenso, utilissimo per collegare Pop Off, Wastegate e attuatori in genere o passaggi di liquidi come acqua, non adatto per olio.

Military type switch with safety protection, yellow colour.
Suitable for any use, notable aesthetic impact.