Waterproof switch

4-position rotary switch with arrow illumination indicating the chosen contact. For multi-contacts or mapping change

Inertial safety switch that disconnects the contact in the event of a collision. 2 connection wires.

12 volt timed relay can activate or deactivate any electronic component with a timer that can be set from 0.5 seconds up to 60 hours!

With this module improperly called digital relay, you can simply activate, keep activated or pulse a load up to 100 amps with a pulse from 3 to 28 volts.

24v relay which, through a very fast impulse with negative or positive command, can activate and keep activated a load of up to 20 amps and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.

Three-position switch.

With newly built 12 volt relays you can simply use a very fast impulse with a negative or positive command to activate and keep a load of up to 20amp activated and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.

It is found in multiple uses from control units for competition on cars or on industrial vehicles such as excavators 01170716 and agricultural vehicles and nautical applications.

Military type switch with safety protection, yellow colour.
Suitable for any use, notable aesthetic impact.

Circuit built and programmed according to your needs up to 2 relays.

Tubo in silicone blu intenso, utilissimo per collegare Pop Off, Wastegate e attuatori in genere o passaggi di liquidi come acqua, non adatto per olio.

Military type switch with safety protection, red colour.
Suitable for any use, notable aesthetic impact.

With this relay you can simply by using a very fast pulse with negative or positive command, activate and hold a load up to 20amp and then always turn it off with the usual pulse of a few milliseconds, and so on. 814

With this relay you can manage stable controls and avoid return currents from magnets or electric motors so as not to spoil the control driver itself or the control unit.